ALIBI ALI-NVR5000P Series Manuel d'utilisateur

ALI-NVR5000P Series Embedded Network Video Recorder User ManualProducts: ALI-NVR5016P, ALI-NVR5032P ALI-NVR5000P Series Network Video Recorder PLEAS

2• Lock/unlocking video les.• Searching and playing back record les by channel number, recording type, start time, end time, etc.• Motion analysi

92For the denition of icons in the playback toolbar, see “6.2.2 Playing back video by channel” on page 88. NOTES: • In the “Recorded video clips” ma

93ALI-NVR5000P Embedded NVR User Manual2. Open the drop-down list in the upper-left corner of the screen, then select Event. 3. Open the Type drop d

94SECTION 6: RECORD, PLAYBACK AND VIDEO BACKUP6. Select an entry in the list (camera channel and the time), then click the Play icon in the playback

95ALI-NVR5000P Embedded NVR User Manual2. Search for and play back the record le(s). See “6.2.2 Playing back video by channel” on page 88 for more i

965. In the pop-up window above, the tag auto theft was keyed in. After entering the tag name, click Enter, then click OK to close the Add Tag window

97ALI-NVR5000P Embedded NVR User Manual10. Click Search. A list of events (channel and time) that occurred during the time frame selected will appear

982. Open the drop-down list in the upper-left corner of the screen, then select Smart. 3. In the following screen, notice that the playback toolbar

99ALI-NVR5000P Embedded NVR User Manual6.2.7 Playback using System logsYou can play back record le(s) associated with channels after searching syste

1002. Select a Start Time, End Time, Major Type and Minor Type., then click Search. In the example below, the search criterion specied are “All” (Ma

101ALI-NVR5000P Embedded NVR User Manual2. Open the drop-down list in the upper-left corner of the screen, then select External le . See above. 3.

3ALI-NVR5000P Embedded NVR User ManualSECTION 1: SYSTEM OVERVIEW• Remote web browser access by HTTPS ensures high security.• Remote reverse playback

1025. Click the Play icon associated with the le you want to play. SECTION 6: RECORD, PLAYBACK AND VIDEO BACKUP

103ALI-NVR5000P Embedded NVR User Manual6.2.9 Auxiliary Functions - Playback frame by framePlay video les frame by frame, in case of checking image

1043. Double-click the date on the calendar to select the day when video was recorded. On the calendar, days when video was recorded for the cameras

105ALI-NVR5000P Embedded NVR User ManualZoom selection area3. Right-click on the image to exit the digital zoom mode.6.3 Backing up Record Files - E

1063. Check the boxes for the camera channels you want to back up. 4. Select the Start Time and End Time of the period when the video clips of inter

107ALI-NVR5000P Embedded NVR User Manual6. If the device you are exporting to is a re-writable device such as a USB ash drive, select the directory

1086.3.2 Export by video searchThe Export by video search feature allows you to export specic video clips. The export operation writes the selected

109ALI-NVR5000P Embedded NVR User Manual5. Click Search to list the video clips recorded during the selected time span. In the Search Result list, yo

1108. In the Export window, select the directory where you want to copy the les, or create a New Folder. 9. Click the Export button to start the Ex

111ALI-NVR5000P Embedded NVR User ManualSECTION 6: RECORD, PLAYBACK AND VIDEO BACKUPNote: The Player utility player.exe will be exported automatically

4Name Function / DescriptionStatus Indicators (cont.)STATUSThe light is green when the IR remote control is enabled; The light is red when the funct

1126. To watch a video clip in the Motion (search result) list, click (highlight) the clip you want to watch, click Details, then in the Event Detail

113ALI-NVR5000P Embedded NVR User Manual8. In the Export window, select the directory where you want to copy the les, or create a New Folder. 9. Cl

1142. Playback a video le. Clip (Start clipping) icon3. Advance the le playback to the start of the segment you want to export, then click the Cli

115ALI-NVR5000P Embedded NVR User ManualClip (Stop clipping) icon5. Right click anywhere in the video window, then select Exit. The Attention pop-up

1168. In the Export window, select the directory where you want to copy the les, or create a New Folder. 9. Click the Export button to start the Ex

117ALI-NVR5000P Embedded NVR User ManualNote: The Player utility player.exe will be exported automatically during video le export. SECTION 6: RECORD,

118SECTION 7: MANAGING USER ACCOUNTSSECTION 7 Managing User AccountsUser accounts are created to control access to the system both at the NVR and wh

119ALI-NVR5000P Embedded NVR User ManualSECTION 7: MANAGING USER ACCOUNTS3. Enter the information for new user, including User Name, Password, Level

120SECTION 7: MANAGING USER ACCOUNTS6. Set the operating permission of Local Conguration, Remote Conguration and Camera Conguration for the user.

121ALI-NVR5000P Embedded NVR User ManualSECTION 7: MANAGING USER ACCOUNTS — Remote Parameters Settings: Remotely conguring parameters, restoring fact

5ALI-NVR5000P Embedded NVR User ManualSECTION 1: SYSTEM OVERVIEWName Function / DescriptionComposite Keys (cont.)5/JKL/EDITEnter numeral “5”;Enter le

122SECTION 7: MANAGING USER ACCOUNTS NOTEOnly the admin user account has permission to restore the DVR to factory default settings. 8. Select the IP

123ALI-NVR5000P Embedded NVR User ManualSECTION 7: MANAGING USER ACCOUNTS2. Select the user to be edited from the list (see the User Management windo

124SECTION 7: MANAGING USER ACCOUNTSadmin user Edit User menu

125ALI-NVR5000P Embedded NVR User ManualSECTION 8: NETWORK SETTINGSSECTION 8 Network Settings8.1 Conguring General SettingsNetwork settings must b

126SECTION 8: NETWORK SETTINGS8.2 Conguring Advanced Settings8.2.1 Conguring DDNSIf your NVR is set to use PPPoE as its default network connection

127ALI-NVR5000P Embedded NVR User ManualSECTION 8: NETWORK SETTINGS — DynDNS: i. Enter Server Address for DynDNS (i.e. members.dyndns.org).ii. In th

128SECTION 8: NETWORK SETTINGS2. Click the NTP tab to open the NTP Settings menu. 3. Check the Enable NTP box to enable this feature.4. Select the

129ALI-NVR5000P Embedded NVR User ManualSECTION 8: NETWORK SETTINGS3. Enter the Alarm Host IP address and Alarm Host Port in the appropriate elds. T

130SECTION 8: NETWORK SETTINGS4. Click Apply to save your settings and close the menu. NOTEThe multicast function must be supported by the network s

131ALI-NVR5000P Embedded NVR User ManualSECTION 8: NETWORK SETTINGS3. Enter a new Server Port number and HTTP Port number in the appropriate elds. T

6Item DescriptionVIDEO OUT (CVBS, VGA, HDMI)CVBS - BNC connector for video output VGA - DB15 connector for VGA compatible monitor. Supports 1920 × 10

132SECTION 8: NETWORK SETTINGS3. Click Apply to save your settings and close the menu. 4. Click the Email tab to open the email settings men.

133ALI-NVR5000P Embedded NVR User ManualSECTION 8: NETWORK SETTINGS5. Congure the following Email settings: — Enable Server Authentication (optional

134SECTION 8: NETWORK SETTINGS2. Click the NAT tab to open the NAT settings menu.3. Check the Enable UPnP box to enable UPnP.4. In the UPnP menu, y

135ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCESECTION 9 System MaintenanceThe Maintenance menus provide several displays that

136SECTION 9: SYSTEM MAINTENANCE9.2.1 Log Search1. Open the Log Information screen. Go to Menu | Maintenance | Log Information2. Select a Start Tim

137ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCE3. You can Export the result of the log search (click Export), choose a log entr

138SECTION 9: SYSTEM MAINTENANCE4. Check the select box for the storage devices that contain log information. 5. Click Export. 6. On the Device Nam

139ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCE9. Check the Export result on a computer by opening a le that was saved. 9.3

140SECTION 9: SYSTEM MAINTENANCE5. Click the Export button to start the export. Allow the operation to nish before continuing. When the export opera

141ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCE2. If the conguration le was saved to a directory, click the folder icon to th

7ALI-NVR5000P Embedded NVR User ManualSECTION 1: SYSTEM OVERVIEW1.1.1 Remote controlThe enter key on the remote control or the front panel has the sa

142SECTION 9: SYSTEM MAINTENANCE9.4 Upgrade FirmwareYou can upgrade the rmware through a local device or remote FTP server. You should check the cur

143ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCEb. Open the Device Name drop down list and select the device that contains the 

144SECTION 9: SYSTEM MAINTENANCE1. Open the Network Trac menu. Go to Menu | Maintenance | Net Detect9.6.2 Testing Network Delay and Packet Loss1.

145ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCE9.6.3 Exporting Network PacketBy connecting the NVR to network, the captured net

146SECTION 9: SYSTEM MAINTENANCE9.6.4 Checking the network statusYou can also check the network status and quickly set the network parameters. 1. Op

147ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCE9.6.5 Checking Network StatisticsUse the following procedure to view real time n

148SECTION 9: SYSTEM MAINTENANCE9.7 Hot Spare device backupThe NVR can be congured for an N+1 hot spare backup system. The system consists of severa

149ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCEa. Set the Work Mode as Hot Spare mode.b. Click Apply, then click Yes to the At

150SECTION 9: SYSTEM MAINTENANCE9.7.3 Managing Hot Spare System1. Open the Hot Spare menu. Go to Menu | Conguration | Hot Spare The connected worki

151ALI-NVR5000P Embedded NVR User ManualSECTION 9: SYSTEM MAINTENANCEWhen the working device goes oine, the hot spare device will record the video of

8Item Name Function13 PTZ buttonEnter the PTZ Control mode (if applicable).In the PTZ Control mode, it is used to adjust the iris of the PTZ camera. 1

152SECTION 10: REMOTE ACCESS SECTION 10 Remote AccessIf you NVR is connected to a local network (LAN), you can access it from another computer on th

153ALI-NVR5000P Embedded NVR User ManualSECTION 10: REMOTE ACCESS 2. In the login window, enter your User Name and Password in the appropriate elds,

154SECTION 10: REMOTE ACCESS c. After clicking Add, the IP address will appear in the Websites list. Click Close. 4. If this login is the rst login

155ALI-NVR5000P Embedded NVR User ManualSECTION 10: REMOTE ACCESS c. Allow the plug-in installation to complete. When the following window appears, c

156SECTION 10: REMOTE ACCESS Multi-screen mode selectCamera list PTZ camera controlsScreen select tabsRemote Live View toolbarLogout buttonChannel vie

157ALI-NVR5000P Embedded NVR User ManualSECTION 10: REMOTE ACCESS — To expand the image to full frame, double click the image in the viewing frame. T

158SECTION 10: REMOTE ACCESS Stop playbackDownload Full screenZoomExpand / contract timelinePlay motion controlsRecord legendPlayback timestampCapt

159ALI-NVR5000P Embedded NVR User ManualSECTION 10: REMOTE ACCESS • Click the Play button to begin playing video. To Download recorded video: NOTET

160SECTION 10: REMOTE ACCESS Log reports can be saved in either text or Excel formats by clicking the Save Log icon.10.5 Remote Conguration screenOp

161ALI-NVR5000P Embedded NVR User ManualSECTION 10: REMOTE ACCESS The location of local les is dened on the Conguration | Local Conguration screen

9ALI-NVR5000P Embedded NVR User ManualSECTION 1: SYSTEM OVERVIEW1.1.3 Soft keyboardOne of two on-screen keyboards appears when you click in a eld th

162SECTION 11: CLEANING SECTION 11 CleaningClean the camera lens and IR lamp shield with a mild glass cleaning solution and a lint free cloth. • Re

163ALI-NVR5000P Embedded NVR User ManualSECTION 12: SPECIFICATIONS SECTION 12 SpecicationsModel ALI-NVR5016P ALI-NVR5032PNumber of Channels Support

164SECTION 12: SPECIFICATIONS Model ALI-NVR5016P ALI-NVR5032PColor / Material BlackMaterial AluminumApprovals CE, FCC, RoHSRemote Client System Requir

165ALI-NVR5000P Embedded NVR User ManualAPPENDIX A: GLOSSARYAPPENDIX A GlossaryDual Stream: Dual stream is a technology used to record high resolutio

166APPENDIX B: FAQAPPENDIX B FAQ Q Why does my NVR make a beeping sound after booting? A The possible reasons for the warning beep are: a. There is

167ALI-NVR5000P Embedded NVR User ManualAPPENDIX C: HDD INSTALLATIONAPPENDIX C HDD InstallationThe following procedures illustrate hard disk drive (H

168APPENDIX C: HDD INSTALLATIONBackFrontPC boardHDD 3 SATA connectorHDD 4 SATA connectorHDD 2 SATA connectorHDD 1 SATA connectorHDD 4 bay HDD 3 ba

169ALI-NVR5000P Embedded NVR User ManualAPPENDIX C: HDD INSTALLATIONThe photo below shows the locations of the HDD mounting screws for HDD 1 through H

170APPENDIX C: HDD INSTALLATION6. Set the HDD in a bay in the chassis as shown below for HDD 4, with the HDD connectors toward the back of the chassi

171ALI-NVR5000P Embedded NVR User ManualAPPENDIX C: HDD INSTALLATIONNVR with 4 HDDs10. Reinstall the NVR cover. 11. After you power on the NVR with

10SECTION 2 Installing the System2.1 Getting Started: Unpacking the EquipmentWhat’s in the boxYour system includes: • ALI-NVR5000P series NVR • R

172APPENDIX D: NVR COMPATIBLE CAMERASAPPENDIX D NVR Compatible CamerasFollowing is a list of IP cameras shown to be compatible with your NVR. Other c

173ALI-NVR5000P Embedded NVR User ManualAPPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream A

174APPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream AudioHikvision®DS-2CD883F-E V5.1.0 bui

175ALI-NVR5000P Embedded NVR User ManualAPPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream A

176APPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream AudioHikvision®DS-2CD2332-I V5.1.0 bui

177ALI-NVR5000P Embedded NVR User ManualAPPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream A

178APPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream AudioHikvision®DS-2CD9111(B) V3.5.0 bu

179ALI-NVR5000P Embedded NVR User ManualAPPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream A

180APPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream AudioHikvision®DS-2DF1-402N V3.1.6 bui

181ALI-NVR5000P Embedded NVR User ManualAPPENDIX D: NVR COMPATIBLE CAMERASIP Camera Manufacturer or ProtocolModel Version Max. Resolution Sub-stream A

11ALI-NVR5000P Embedded NVR User Manual2.2 NVR installation general guidelines2.2.1 Installing an HDD in the NVRIf you purchased your NVR without an

iiCAUTIONDo not expose this appliance to rain or moisture. Operate this device only in environments where the temperature or humidity is within the r

12If you are using Cat 5e or Cat 6 copper (Ethernet) cable to connect your cameras to the NVR, or other cameras to the LAN, the cable distance from th

13ALI-NVR5000P Embedded NVR User Manual2. Remove the NVR top cover. See “APPENDIX C HDD Installation” on page 167 for instructions. 3. Locate the ju

14SECTION 2: INSTALLING THE SYSTEM3. Plug the mouse into the USB connector on the front or back of the NVR. 4. If you plan to access your NVR remote

15ALI-NVR5000P Embedded NVR User ManualSECTION 2: INSTALLING THE SYSTEM2. The Setup Wizard can assist you in making important conguration settings i

16Observint strongly recommends that you change the default admin user password to improve the security of your surveillance system. To change the adm

17ALI-NVR5000P Embedded NVR User Manual5. In the date and time setup window, click the eld you want to change, then use the drop-down list or setup

187. Click Next after you congured the network parameters. The HDD management Wizard window will open. If a new DVR is shipped with a pre-congured

19ALI-NVR5000P Embedded NVR User Manualb. Click the Start Recording box to check it. c. Select one of the recording modes: either Normal or Motion D

20e. Click OK when the recording mode for each camera is selected. The Wizard will close and the NVR will present the Live View display. For more inf

21ALI-NVR5000P Embedded NVR User ManualLive View display after camera adjustments2.6 Access the Menu systemAfter the initial setup of your DVR using

iiiALI-NVR5000P Embedded NVR User ManualSAFETY INSTRUCTIONS Regulatory informationFCC informationFCC compliance: This equipment has been tested and fo

22If ID Authentication is not disabled (see the Menu | Conguration | General settings), a login window will open. In the Login window, select a User

23ALI-NVR5000P Embedded NVR User Manual2.7.1 Camera OSD setupYou can congure the OSD (On-Screen Display) settings for the camera, including date, ti

242. In the Camera eld drop down list, select the camera you want to congure. In the example shown, IP Camera 1 is selected. 3. Drag the Brightnes

25ALI-NVR5000P Embedded NVR User Manual2. In the Camera eld drop down list, select the camera you want to congure. In the example shown, IP Camera

26a. Select the other channels that should trigger recording on this channel, then click Apply to save your settings. b. Click the Arming Schedule t

27ALI-NVR5000P Embedded NVR User Manuale. Select the actions you want to occur, then click Apply to save your settings, and OK to return to the Motio

282. In the Camera eld drop down list, select the camera you want to congure. In the example shown, IP Camera 1 is selected. 3. Check or un-check

29ALI-NVR5000P Embedded NVR User Manuala. In the Arming Schedule tab, dene a daily schedule for up to eight weeks (56 days) when the camera is monit

30 NOTETest your settings during broad conditions to ensure that your tamper-proof settings trigger an action. You may need to return to this menu lat

31ALI-NVR5000P Embedded NVR User Manualb. In the Arming Schedule tab, dene a daily schedule for up to eight weeks (56 days) when motion detection is

iv• Install the unit away from heat sources such as radiators, heat registers and stoves.• Installation of the unit near consumer electronics device

322.8 Adding cameras manually IP cameras can connect to the NVR either through the IP ports on the back panel of the NVR, or through the LAN the NVR

33ALI-NVR5000P Embedded NVR User Manualc. For the camera channel selected, click the icon in the Edit column. The Edit IP Camera window will open. d.

34f. On the Protocol line, click the entry eld and select the camera protocol (usually the manufacturer’s name) of the camera you want to add. The P

35ALI-NVR5000P Embedded NVR User Manuali. Click Apply, and then click OK to close the IP Camera Edit window. j. In the IP Camera screen, click the R

362.8.1 Editing camera optionsAfter adding of the IP cameras that are installed on the local LAN to the NVR, some camera setup information can be rec

37ALI-NVR5000P Embedded NVR User Manual NOTEBefore customizing the protocol for the network camera, contact the manufacturer for specic information r

386. Select the custom protocol you congured, and then enter the IP address, user name and password of the camera.7. Click Add to add the camera.2.

39ALI-NVR5000P Embedded NVR User Manual2. Check the status of the HDD. If the status is: — Normal or Sleeping - The HDD is working normally. — Unini

40ii. Click the Search button to search for available NAS disks. iii. Select the NAS disk directory from the list shown, or manually enter the direc

41ALI-NVR5000P Embedded NVR User Manualiv. Select the IP SAN disk directory from the list shown below.v. Click OK to add the selected IP SAN disk to

vALI-NVR5000P Embedded NVR User ManualTABLE OF CONTENTSTable of ContentsSECTION 1 Systems Overview ...

42Record/Capture: Use the eSATA device for record and capture data. Refer to the following steps for operating instructions.3. If the eSATA device wi

43ALI-NVR5000P Embedded NVR User ManualSECTION 2: INSTALLING THE SYSTEM2. Click Advanced to check the storage mode of the HDD. a. In the Mode select

442.9.5 HDD Detect.The HDD Detect feature provides two methods of monitoring the HDD: display of S.M.A.R.T. (Self-Monitoring, Analysis and Reporting

45ALI-NVR5000P Embedded NVR User Manual NOTES.M.A.R.T. data provided by each HDD manufacturer is usually dierent. Refer to the manufacturer’s website

46• HDD Error: Writing HDD error or unformatted HDD.• Network Disconnected: Disconnected network cable.• IP Conicted: Duplicated IP address.• Ill

47ALI-NVR5000P Embedded NVR User Manual1. Open the Alarm menu. Go to Menu | Conguration | Alarm 2. Select the Alarm Input tab.3. Open the Alarm In

487. Select the Trigger Channel tab, if not selected. Select one or more camera channels which will start to record/capture or become full-screen mon

49ALI-NVR5000P Embedded NVR User Manual14. Select the Linkage Action tab to set up alarm response actions of the alarm input. 15. In the Linkage Act

5019. Repeat steps 3 - 18 above to congure additional alarm inputs connected to your NVR, if necessary. You can also copy an the alarm input setup y

51ALI-NVR5000P Embedded NVR User Manual2. Check the Enable Event Hint box. See above. 3. Click the icon to set the type of event to be displayed o

viTABLE OF CONTENTS2.10 Conguring Exception Alarms ...452.11 Setting sensor alarms ...

52If alarms are triggered simultaneously in several channels, their full-screen images will be switched at an interval of 10 seconds (default dwell ti

53ALI-NVR5000P Embedded NVR User Manual2. Select an alarm output, set alarm name, then specify a dwell time. 3. Click the Settings icon ( )to open

546. Repeat the previous step for other days of the week, or click the Copy button to apply the same schedule to other days, or repeat the previous s

55ALI-NVR5000P Embedded NVR User ManualSECTION 3 Startup, Shutdown, RebootAfter the DVR and cameras are installed, the DVR system must be congured

56 NOTEThe default User Name with administrative privileges and its associated Password are admin and 1111. 3. In the Menu window, click the Shutdown

57ALI-NVR5000P Embedded NVR User ManualSECTION 4 Live View InterfaceThe Live View interface is the primary camera viewing and monitoring mode. It ca

58• Add IP Camera: the shortcut to the IP camera management interface.• Playback: playback the recorded videos for current day.• Aux/Main output sw

59ALI-NVR5000P Embedded NVR User Manual4.1.2 Using the mouse in Live viewTable 3. Mouse operation in Live viewName DescriptionMenu Enter the main men

60 NOTEIn the live view mode of the main output monitor, the menu operation is not available while Aux output mode is enabled.4.1.4 Live View Status

61ALI-NVR5000P Embedded NVR User ManualDigital Zoom: Shows the selected portion of the camera image in full-screen mode. To select an area, left-click

viiALI-NVR5000P Embedded NVR User ManualTABLE OF CONTENTS6.1.6 Conguring Holiday recording ...836.1

624.3 Live View pop-up menuRight-clicking the mouse on the desktop opens the pop-up window shown below. Clicking one of the items listed produces the

63ALI-NVR5000P Embedded NVR User ManualAdjust the settings in the screen as needed: — Video Output Interface: Designates the output to congure the s

644. Click the single- or multi-screen select icon for the screen split you prefer. In the example shown above, a 4 * 4 screen is selected. 5. Click

65ALI-NVR5000P Embedded NVR User ManualSECTION 5 PTZ Controls5.1 Conguring PTZ settingsFollow the procedure to set the parameters for control of a

662. Use the directional button to point the camera at the position where you want to create a preset.3. Click the round icon ot the left of Save Pr

67ALI-NVR5000P Embedded NVR User Manual3. Click the preset number you want to call.Call preset in live view mode:1. Click the button PTZ in the lowe

682. Select a Patrol number in the drop-down list of patrol.3. Select the icon under Patrol option box to add KeyPoints to the patrol.Patrol numbe

69ALI-NVR5000P Embedded NVR User Manual5.2.4 Calling PatrolsCalling a patrol makes the PTZ to move according the predened patrol path. Calling patro

705.2.5 Customizing PatternsPatterns can be set by recording the movement of the PTZ. You can call the pattern to make the PTZ movement according to

71ALI-NVR5000P Embedded NVR User Manual3. Click , then use the mouse to drag the image, or click the eight directional buttons in the control box un

viiiTABLE OF CONTENTS8.2.8 Conguring UPnP™ ...133SECTION 9 System Maintenance ...

72PTZ control panel iconsSECTION 5: PTZ CONTROLS

73ALI-NVR5000P Embedded NVR User ManualSECTION 6 Record, Playback and Video BackupAfter the initial setup of your NVR using the Wizard, the Menus in

746.1 Conguring record settings6.1.1 Setting camera parameters1. Enter the Record settings interface to congure the encoding parameters. Go to Me

75ALI-NVR5000P Embedded NVR User Manuala. Congure the parameters of the camera.b. Click Apply to save the settings.Capture parameters5. Open the C

762. To congure the Record schedule: a. Open the Camera drop-down list to select the camera you want to congure.b. Check the Enable Schedule box.

77ALI-NVR5000P Embedded NVR User Manual NOTEYou can dene up to eight recording time periods for each day, each with a specied recording type. Record

78Normal recordingRecording triggered by alarmRecording triggered by motion or alarmRecording triggered by motionRecording triggered by motion and a

79ALI-NVR5000P Embedded NVR User Manual6.1.3 Conguring Capture schedule1. Open the Capture Schedule menu. Go to Menu | Record | Schedule | Capture

802. To congure Motion Detection: a. Choose camera you want to congure.b. Check the Enable Motion Detection box.c. Use the mouse to drag a recta

81ALI-NVR5000P Embedded NVR User Manuale. In the Trigger Channel window, select the other channels that should trigger recording on this channel, the

1ALI-NVR5000P Embedded NVR User ManualSECTION 1: SYSTEM OVERVIEWSECTION 1 Systems OverviewCongratulations on purchasing your new Embedded NVR securi

82i. Select the actions you want to occur, then click Apply to save your settings, and OK to return to the Motion Detection menu. NOTETest your sett

83ALI-NVR5000P Embedded NVR User Manualc. Click the icon after Normal or Motion Detection. d. When the Attention window opens, click Yes. 3. To dis

842. To Edit the Holiday schedule.a. Click the icon in the Edit (right) column of the line you want to edit. The Edit window will open. b. In the E

85ALI-NVR5000P Embedded NVR User Manuale. Click Apply to save settings.f. Click OK to exit the Edit menu.3. Open the Record Schedule settings menu

86c. Click Apply and then in the pop-up message box, click Yes to save your settings.d. Click OK to go to the menu window.7. Repeat the steps above

87ALI-NVR5000P Embedded NVR User ManualLock icon (shown “Unlocked”)5. To protect the record les: a. Determine which les you want to protect, and t

88Instant playback by channelIn Live View mode, click the channel you want to playback, then click the playback icon on the Quick Setting toolbar. In

89ALI-NVR5000P Embedded NVR User ManualSECTION 6: RECORD, PLAYBACK AND VIDEO BACKUP4. To start playback, click the Play button ( u ) in the playback

90Playback timestamp TimelinePlayback motion controlsPlayback speedRecorded video clipsStart/end time of timelineMuteAdd default tagAdd custom ta

91ALI-NVR5000P Embedded NVR User ManualNOTES: • In the “Recorded video clips” markings, blue marks represent Normal recording, red marks indicate eve